(Advanced users only)
The following conditions MUST be met in order for this to work:
1. B-Dploy must be available on Zynchro
2. Player must have a working wired connection
3. Might not work on every Firmware
4. Player must be reachable via local network
Also, please have both your player’s Serial Number and your local IP address on hand (if you do not have these both please do not proceed). You can get this information in Zynchro by location your player (By Map, By List, etc) and clicking on the Health tab, for your Serial Number, and then on the Network tab for the Local IP.
If all previous conditions are met, you must now eliminate your player from Zynchro, to do so locate your player (By Map, By List, etc) and click on the health tab and then on the trash can icon.
Now go to Player Config > B-Deploy. Your player should now be listed on that screen and you will need to delete it by clicking on the red Delete button.
Once it is not in that client, you can go ahead and create a new B-deploy in the client where you wish your player to be.
In Zynchro, click on the gear icon and then select your desired client.
Go to Player Config > B-Deploy and click on blue Add Player button.
Once you see your player listed, you must now access it via local network. You can do this by opening a browser tab and inputting your local IP in the address bar.
Once you are on your player’s local IP you should see this screen. Click on the Diagnostic tab and then on Disable under “Disable Autorun” button, confirm that you wish to disable autorun, your player will reboot. Once it has finished, click on Format Storage button below Storage Formatting.
Select Storage sd and then FAT32 for the File System. Click Format.
You should see a confirmation message on the top of your screen.
Go to Control Tab and click on Reboot button below Reboot Player
If the process was successful, your player will continue it’s setup process and you should see it in Zynchro once it is done (this might take a few minutes).
In most cases the player will not have content and you will need to republish your content.